How does precious metal clay work?

Sharing is caring!

During the firing process, the harmless binder burns away and the silver particles sinter (fuse) to form a solid 99.9% pure silver piece. Metal clay can be safely fired using a butane torch, gas stove or kiln. After firing, metal clay can be burnished to a gleaming finish.

How does silver art clay work? Silver clay is made up of thousands of tiny silver particles which are held together in an organic binder. As the clay dries, the moisture from the binder evaporates. When heated, it burns away completely leaving only the sintered metal remaining.

Do you need a kiln for metal clay? Some base metal clays (depending on their size) and almost all fine silver metal clays can be torch-fired rather than requiring a kiln. An inexpensive, handheld, butane torch can be used as an entry level firing method for small, simple pieces.

Does precious metal clay tarnish? For instance you know that silver plated articles will tarnish. I have not had problems with silver dip, used briefly, and washed off, even with people who complain of other sensitivities. In other words, if it does sink in, it washes out too. Dennis.

How do you fire precious metal clay? Light your butane hand torch and set to a blue flame. Hold the torch about 2cm away from your design, moving the flame in a circular motion around the piece. Gradually move the flame closer to the PMC as you make that circular motion. As you heat the PMC you’ll notice that it will start to smoke and then catch fire.

Is precious metal clay real silver? Precious Metal Clay (PMC) As a solid-phase sintered product of a precious metal powder used to form a precious metal article, the material consists of microscopic particles of pure silver or fine gold and a water-soluble, non-toxic, organic binder that burns off during firing.

How does precious metal clay work? – Related Asked Question

How do you use bronze metal clay?

Precious Metal Clay (PMC) As a solid-phase sintered product of a precious metal powder used to form a precious metal article, the material consists of microscopic particles of pure silver or fine gold and a water-soluble, non-toxic, organic binder that burns off during firing.

READ:   Where to buy precious metals in uk?

Can I fire metal clay with a torch?

Torch firing is a great, inexpensive, way to fire your metal clay. You can use a small butane gas torch, like a kitchen torch, to fire all the Art Clay Silver clays. The piece you fire shouldn’t be much larger than a £2 coin, and weigh no more than 25 grams.

What temperature does metal clay fire at?

We know the maximum temperature for all forms and types of silver metal clay is 1650°F / 899°C, but what’s the maximum time? Technically, there is no maximum firing time. As long as you do not exceed 1650°F / 899°C. Remember that silver clay is just below its melting point when it’s sintering.

How long do you fire metal clay?

A good general rule for firing pieces comprising only of metal clay is 900°C (any higher than this and the metal clay begins to distort) for two hours. This will make your design really strong.

How do you polish silver clay?

You can either use a dry brush or a add a little soapy water. Simply brush over the entire surface of the charm and you will very quickly begin to see the white disapper and silver begin to shine through. If you wish to achieve a matte or satin finish, you can simply leave the silver like this.

How do you clean silver clay Jewellery?

This involves lining a bowl with aluminium foil, positioning the Jewellery onto the foil and then pouring boiling water into the bowl with a dash of bicarbonate of soda. Just add a spoonful at a time, until you see the tarnish lift off. Rinse and dry thoroughly, then buff up with an anti-tarnish cloth.

Can PMC3 be torch fired?

Torch Firing PMC3, PMC Flex, PMC+ and 22K Gold

Pieces the size and thickness of a 50p piece can be fired with a butane gas torch. Place the item on a torch block. Gently heat the piece, wait for the binder to burn off and the piece to glow a pale orange.

READ:   How much precious metal is in a prius catalytic converter?

Do you need a kiln to fire silver clay?

Art Clay Silver 950 must be fired in a Kiln. (It is not suitable for Torch or Gas Hob Firing).

What temperature does silver clay fire?

Q. How do you fire Art Clay Silver in a cone sitter kiln? Low fire clay fires to 1200 F which corresponds to cone 019-020, the highest recommended firing temperature of all silver is 1650F or cone 010-011.

Can you solder metal clay?

Soldering. Precious Metal Clay or Art Clay is metallurgically just like other metals but structurally a little more porous. It can be joined by using the same flux, solder and torches as silver and gold, but because of its porosity, Precious Metal Clay or Art Clay will “soak up” solder.

What is the difference between art clay silver and PMC?

Yes, all three versions yield the same metal, 100% silver. The difference is not in the ingredients but in the shape of the particles. Original PMC is made with flake‑like particles that allow room for the binder, which gives the material its workability. PMC+ is made with a particle with more neatly defined edges.

Can you fire metal clay in a microwave kiln?

Designed for working primarily with small glass objects or precious metal clay, the microwave kiln is also suitable for firing small clay pieces, from beads and pendants to test tiles or small sculptural objects.

What is bronze metal clay?

Bronze clay is easily sculpted, molded, textured, carved and formed, and become solid bronze objects when fired in a kiln. Your imagination and just a few simple tools will allow you to create solid bronze jewelry or sculpture.

Can bronze clay be torch fired?

Firing bronze metal clay can be done in a kiln or with a hand torch.

What is sintering in metal clay?

A simplified form of powder metallurgy, this method of bonding individual metal particles with heat is known as sintering. Sintering has been in use for thousands of years, most commonly from the beginning of the twentieth century. Its use in jewelry-making began when metal clay was developed in the early 1990’s.

READ:   Should baking powder be aluminum free?

Is gold clay real gold?

The lump clay is used very much like silver clay and has it’s own unique working properties. The 22K gold paint is a product that is painted onto unfired or finished silver pieces and is fired in a kiln or with a torch.

Gold Clay Products.

Temperature Hold Time
Torch Red Glow 5 min

Can you get gold clay?

Art Clay water-based gold clay, sometimes called metal clay or precious metal clay, is made by Aida Chemical Industries in Japan: it’s a composite clay-like material, made of 95% 22K gold and 5% water-based binder.

Can you bake metal clay in the oven?

Using a kiln all but guarantees your precious metal clay will come out perfectly, but unless you’re a diehard jewelry maker, it’s unlikely you have one of those lying around. Instead, grab your good ole’ toaster oven and set it to 350 F. Place your final piece on a pan and bake for 20 minutes. That’s it!

Does silver clay shrink when fired?

Firing on the Hob

Ensure the Art Clay Silver clay is completely dry before firing (allow at least 24 hours). The clay will shrink as it is fired.

Can you bend metal clay after firing?

After it has been fired it is pure metal and can be worked using metalsmithing tools and techniques, such as soldering, hammering, texturing, filing, bending, etc.

How much does silver clay shrink when fired?

It can be fired using a torch or a kiln, and the shrinkage rate is at approximately 10 – 15%. Like PMC3 and PMC+, this is a Fine Silver product and can be hallmarked as such.

Sharing is caring!