How long does it take to smoke a 12 pound boston butt?

Sharing is caring!

Smoke the pork until it reaches at least 195 degrees. This can take anywhere between 12-20 hours, depending on the consistency of heat in your smoker and the size of your pork roast. Once your pork reaches the desired temperature between 195-202 degrees, remove the pork shoulder from the smoker and wrap in foil.

How long does it take to smoke a 13 lb Boston butt? A basic rule of thumb, but in no way is it an exact guide, is 90 minutes of smoking time per pound at 225° to 250°. Another way is to use a thermometer the entire time for indications on when your pork may be done. Remove it from the smoker once it reaches an internal temperature of 165°.

How long smoke 11lb Boston butt? Place pork butt in aluminum pan and wrap tightly with foil. Place back in smoker (or oven) until internal temperature hits 200. For a 10lb butt this usually takes me 10 – 12 hours.

How long does it take to cook a 12 lb Boston butt at 300 degrees? Pork shoulder and pork butt should cook at a rate of about 60 minutes per pound when the smoker temperature is set to 300 degrees.

How do you cook a 12 pound Boston butt? Place in a roasting pan lined with a rack and cook at 450℉ for 15-20 minutes to create a golden-brown crust. 4. Lower the oven temperature to 250℉ and cook for an additional 45 minutes to 1 hour per pound. Cook until the meat is tender and pulls back from the bone.

How long does it take to smoke a 12 pound boston butt? – Related Asked Question

How long does it take to cook a 10 lb Boston butt at 250 degrees?

At 250 degrees, boneless pork shoulder should cook at a rate of about 90 to 95 minutes per pound. To put it in practical terms, this means that a 10-pound cut of pork shoulder will be done in around 15 to 16 hours.

Do you smoke a Boston butt fat side up or down?

Place pork butt on the smoker, fat side up and close the lid. Smoke for 6 hours, or until the internal temperature reaches 175 degrees.

How long does it take to smoke a Boston butt at 225?

In your case, smoking a whole six pound Boston butt at 225°F would normally take around one and one-half hours per pound, more or less, to become tender enough to pull or shred (internal temperature of 190+°F), or up to 9 or more hours.

How long do you smoke a pork Boston butt?

Smoke for approximately 4 hours, spritzing with the spray bottle every hour. Check the internal temperature of the pork shoulder using a meat thermometer. By this time, the pork should be at LEAST 145 F degrees.

How long does it take to smoke a 10 lb pork shoulder at 225?

At 225, figure roughly 2 hours per pound of meat, so the same piece of smoked pork shoulder takes from 12- 16 hours at 225. There are a lot of factors in how long it takes, including the humidity in the air, how consistent the grill holds temperature, the outside temperature, and more.

How do you smoke a Boston butt fast?

At 225, figure roughly 2 hours per pound of meat, so the same piece of smoked pork shoulder takes from 12- 16 hours at 225. There are a lot of factors in how long it takes, including the humidity in the air, how consistent the grill holds temperature, the outside temperature, and more.

How long does it take to smoke a Boston butt at 350 degrees?

Simpler than brisket. Simpler than ribs. In a nutshell, you season the hell out of it (for tips on buying and seasoning pork shoulder, see Parts 1 and 2 of this series) and cook it at a low to moderate heat for 3 to 6 hours (2-1/2 to 3 hours at 350 degrees, 5 to 6 hours at 250 degrees.)

How long does it take to smoke a Boston butt at 300 degrees?

Preheat a grill or smoker to 300 degrees F. Place the pork butt on the grill or in the smoker, and cook over indirect heat until tender, 4 to 5 hours.

What temperature should I smoke pulled pork at?

“Low and slow” experts typically recommend keeping the internal air temperature of your smoker at about 225°F (107°C) during the cook. But at that temperature, it can take as long as 18 hours to bring the internal temperature of the pork up to its target of 195-205°F (91-96°C).

Is pulled pork done at 180?

Pulling the Pork

Once the meat reaches an internal temperature of 180 F to 190 F, it is ready to be pulled. You can serve the meat once it reaches 165 F, but it won’t be tender enough to pull apart properly.

How long does a 10 pound pork shoulder take to smoke?

When slow-smoking a pork shoulder, you should figure 1 1/2 hours per pound of pork. A 10-pound, bone-in pork shoulder takes a long time to cook, but for the majority of that time it is in the smoker. You can get it started right after breakfast and have it ready in time for dinner.

How long does it take to smoke a Boston butt in an electric smoker?

Season the pork butt heavily with the dry rub (optional) and place inside the smoker. Add 2 handfuls of wood chips into the cup of the electric smoker or onto the hot coals. Smoke the meat for approximately 1 to 2 hours per pound depending on the temperature of the smoker [see notes below].

What temperature do you smoke a Boston butt at?

I smoke Boston butts to a temperature of at least 190 degrees. If you like sliced BBQ , 185 degrees is fine but for pulled or chopped I want the final temp. to be at least 190. Once the internal temperatures reaches 190 I take the butt out of the smoker and immediately wrap it tightly with aluminum foil.

What wood is best for smoking Boston butt?

Also, smoking over maple wood can leave your cut of pork looking great with a bright golden crust. Smoking over maple can be a particularly solid option if you are looking to cook some baby back ribs or pork butt. In fact it is the best wood for smoking pork butt hands down.

How do you smoke a Boston Butt with wood?

Place 1 chunk of Hickory wood, 1 chunk of Cherry wood, and 2 Sweet Onion quarters directly on coals. Center Boston Butt on cooking rack and smoke for 3 hours or until desired color is reached. Combine Red Wine Vinegar and Water in a spray bottle and spritz butt every hour during smoking process.

How long does it take to smoke a 17 lb pork shoulder?

For a whole shoulder it takes 1hr per pound – so expect a 17-18 hour cook. I smoke the pork shoulder with hickory wood until it gets a nice bark on the outside and hits around 150-160 internal.

How long does it take to smoke a pork shoulder at 275?

If you’re smoking pork shoulder at 275 degrees, the cooking process should take about 80 to 90 minutes per pound. This is a good middle-of-the-road option. We would recommend setting the temperature to 225 degrees if you’re willing to allow the pork to cook for two hours per pound.

Is 275 too hot for pork shoulder?

Cook the pork shoulder in a 275° F oven, or on the grill over indirect heat, until the internal temperature reaches 180° F to 190° F—about 6 hours. The meat should be very tender and easily pull away from the bone.

How long does pork butt take to smoke?

How Long to Smoke a Pork Butt. With your smoker running steady at 225 degrees F, you can typically plan about 2 hours of cook time per pound of pork. For example, an 8-pound pork shoulder will take about 16 hours from start to finish.

How long would it take to cook a 10 lb pork shoulder?

Allow the meat to sit at room temperature for 30 minutes before cooking. Preheat the oven to 350 and cook roast for 2 hours at 350 and 3 and 1/2 hours at 325 degrees F. Roast the pork for 35 minutes per pound, uncovered, until the skin is crispy-brown.

How can I speed up smoking pork shoulder?

Remove the pulled pork from the grill and place in the foil pan. Wrap the top with a double layer of aluminum foil, pinching around the edges of the pan. Doing this will trap the heat inside better and cook the pork faster. You can still track temp of meat by sticking probe in pork before wrapping.

How long does it take to cook a Boston butt at 325 degrees?

Sear pork about 2 minutes on each side or until well browned. Remove from heat. Place pork skin side up, and add apple cider and next 3 ingredients. Cover and bake at 325° for 3 hours 30 minutes.

Is 300 too high for pork shoulder?

Let the wrapped pork butt continue cooking at 300°F until it reaches approximately 205°F. After many, many pork butts, I can tell you that somewhere between 205°F and 207°F is about as perfect as you can get. The meat is tender, much of the fat is rendered and that’s exactly what you want.

What can I smoke in 6 hours?

Instead of over 10 hours of cooking time, a good chuck roast can be smoked in just 5 – 6 hours. This is another cut where you want to make sure you get a good quality beef grade and look for marbling throughout.

How long should a pork butt rest?

A resting time of 30 minutes is preferable when making pulled pork. You can let the meat rest for anywhere from 15 minutes to 2 hours, but you should target the 30-45 minute range for best results. Try not to wait too long, or the meat might get cold, especially if you’ve left it uncovered.

Can I overcook pulled pork?

Yes, it is possible to overcook beef and pork. The muscle fibers go through stages of tough-tender-tough, so yes, after too long a time you get tough, dry meat.

When should I pull my Boston butt?

Return pork to the grill (or smoker) The pork is finished cooking when it pulls apart easily and reaches an internal temperature of 190 to 195 degrees F, about another 1 to 2 hours. Let rest for 1 hour, then unwrap the pork butt and pull the bone out.

Is Boston butt done at 165?

As the moisture cooks out, which is all that intramuscular fat rendering out, the internal temperature of the pork shoulder will start to rise again at a faster pace. When the pork shoulder internal temperature reaches around 165 – 170 degrees F it is likely out of the stall.

How long does the stall last when smoking a pork shoulder?

In general, a pork shoulder stall or brisket stall can last up to 6 hours. It sometimes can be 2 hours, but 4 hours is usually the average. Each piece of meat is different so the length of the stall varies as well.

How long do you smoke a Boston butt at 200 degrees?

Pork shoulder should smoke at a rate of 2 hours per pound at 200 degrees. Since all large cuts of meat cook at different rates, it’s important to keep an eye on the thermometer as the pork climbs above the 160-degree mark.

Can you smoke a Boston butt at 200 degrees?

Poke it in the meat and give it a twist. That way you’ll know exactly when it’s done enough to shred. If you’ll be smoking your pork shoulder at 200°F, it could take an awful long time to smoke, maybe 2 or more hours per pound. If at all possible, smoke your shoulder at a higher temperature, around 220 degrees.

Sharing is caring!

Scroll to Top