How to smoke a boston butt quickly?

Sharing is caring!

Place in smoker at 250 degrees. After 3.5 hours, or when internal temperature hits 145 degrees, remove butt, place in pan fat side down, and add seasoning and drizzle with honey. Cover in foil and return to smoker at 275 degrees. Check for tenderness when pork butt approaches 190 degrees.

Can you cook a Boston butt fast?

Refrigerator thawing: place pork product on a plate and store it on the lowest shelf of the fridge, to prevent dripping (or cross-contamination). You should allow at least 24 hours for roasts or larger items to thaw, while for smaller items, you should plan to wait 2-3 hours.

How can I speed up pork butt? As meat smokers we are all about patience– low and slow is our motto and we believe that the flavor and texture of things like smoked pork butt are greatly enhanced by cooking it slowly in a low heat environment with plenty of smoke kissing the meat as it goes through it’s metamorphosis.

How do you speed up a pork shoulder in a smoker? Maintain 225 °F for about 3 hours making sure to keep the smoke going real good the entire time. Once the pork butt has smoke cooked for 3 hours, it is time for the hot and fast part.

How long does it take to smoke a Boston butt? Smoke for approximately 4 hours, spritzing with the spray bottle every hour. Check the internal temperature of the pork shoulder using a meat thermometer. By this time, the pork should be at LEAST 145 F degrees.

How to smoke a boston butt quickly? – Related Asked Question

Is 275 too hot for pork shoulder?

Cook the pork shoulder in a 275° F oven, or on the grill over indirect heat, until the internal temperature reaches 180° F to 190° F—about 6 hours. The meat should be very tender and easily pull away from the bone.

How long does it take to smoke a pork shoulder at 225?

At 225, figure roughly 2 hours per pound of meat, so the same piece of smoked pork shoulder takes from 12- 16 hours at 225. There are a lot of factors in how long it takes, including the humidity in the air, how consistent the grill holds temperature, the outside temperature, and more.

Do you smoke a Boston butt fat side up or down?

Place pork butt on the smoker, fat side up and close the lid. Smoke for 6 hours, or until the internal temperature reaches 175 degrees.

Is 190 OK for pulled pork?

Pulling the Pork

Once the meat reaches an internal temperature of 180 F to 190 F, it is ready to be pulled. You can serve the meat once it reaches 165 F, but it won’t be tender enough to pull apart properly.

Should I wrap my pork butt?

A boneless 8-pound pork butt should take about 12 hours to cook if it’s left unwrapped. For best results, you should wrap it about two-thirds of the way through this projected cooking time, which means taking it out of the smoker at around the 8-hour mark. Why wait that long?

What temp does pork butt stall?

The Stall: Even with our careful attention to our smoker temps, we still experienced what “low and slow” experts call “the stall.” When smoking meats like beef brisket or pork butt over extended periods, the internal temperature of the meat can seem to plateau or stall at around 160°F (71°C)—it can even drop slightly.

At what temp is a Boston butt cooked?

Pork butt is done when it reaches an internal temperature of 200 degrees Fahrenheit. Some pitmasters say you should pull it from the grill at 195 degrees, while others claim that it’s better to wait until the thermometer reads 203 degrees. In any case, 200 degrees is a good rule of thumb to follow.

What is the best temperature to smoke Boston butt?

I smoke Boston butts to a temperature of at least 190 degrees. If you like sliced BBQ , 185 degrees is fine but for pulled or chopped I want the final temp. to be at least 190. Once the internal temperatures reaches 190 I take the butt out of the smoker and immediately wrap it tightly with aluminum foil.

How long smoke 9lb Boston butt?

The cook time for pork shoulder is around 90 minutes per pound in a 250° F smoker. A 4-pound pork shoulder will take approximately 6 hours. A 9-pound pork shoulder will take approximately 13 ½ hours. Frequently monitor the internal temperature.

How long smoke 5lb Boston butt?

For pork shoulder or pork butt, the smoking time usually takes about 2 hours per pound minutes per pound of meat at 225°F. Otherwise, plan on about 60-90 minutes per pound at 250°F.

Can you smoke a Boston butt at 250?

At 250 degrees, boneless pork shoulder should cook at a rate of about 90 to 95 minutes per pound. To put it in practical terms, this means that a 10-pound cut of pork shoulder will be done in around 15 to 16 hours.

How long do you smoke a Boston butt at 250?

A basic rule of thumb, but in no way is it an exact guide, is 90 minutes of smoking time per pound at 225° to 250°. Another way is to use a thermometer the entire time for indications on when your pork may be done. Remove it from the smoker once it reaches an internal temperature of 165°.

Why did my pulled pork come out tough?

If you don’t cook the connective tissue properly, it will be tough and rubbery. The connective tissue has to break down and literally melt away in the meat. This takes time.

How long does a 10 pound pork shoulder take to smoke?

When slow-smoking a pork shoulder, you should figure 1 1/2 hours per pound of pork. A 10-pound, bone-in pork shoulder takes a long time to cook, but for the majority of that time it is in the smoker. You can get it started right after breakfast and have it ready in time for dinner.

Can you smoke a Boston butt at 200 degrees?

Poke it in the meat and give it a twist. That way you’ll know exactly when it’s done enough to shred. If you’ll be smoking your pork shoulder at 200°F, it could take an awful long time to smoke, maybe 2 or more hours per pound. If at all possible, smoke your shoulder at a higher temperature, around 220 degrees.

How long should pork butt sit?

A resting time of 30 minutes is preferable when making pulled pork. You can let the meat rest for anywhere from 15 minutes to 2 hours, but you should target the 30-45 minute range for best results. Try not to wait too long, or the meat might get cold, especially if you’ve left it uncovered.

Why won’t my pulled pork pull apart?

When pulled pork isn’t shredding, it could be because the meat didn’t cook long enough. Cooking it too long, or attempting to rush the process by cranking up the heat, are two other common culprits. It’s also important to use a reliable method for shredding the meat.

Does resting temp raise pork?

The internal temperature of the meat will always continue to rise a little during the resting period, so you should remove your meat from the oven or grill prior to reaching its target doneness temperature. Otherwise, it will be overcooked.

Does wrapping a pork shoulder make it cook faster?

Wrapping with Peach/Pink Butcher Paper

Hastens cooking time, making the meat less prone to drying out in your grill or smoker. As a technique, wrapping in butcher paper works best when the meat is allowed to reach the stall (usually between 160 and 170 degrees internal temperature) before wrapping.

What can I spritz pork shoulder with?

Spritz for Pulled Pork

Make sure you have a food safe spray bottle. Fill it with equal parts apple cider vinegar and apple juice (or just apple cider vinegar and water, which is our preference to cut down on excess sweet. Or just get creative with your mixture).

Can I overcook pulled pork?

Yes, it is possible to overcook beef and pork. The muscle fibers go through stages of tough-tender-tough, so yes, after too long a time you get tough, dry meat.

How do you tell if my Boston butt is done?

If it is bone in, wiggle and pull the bone, if it moves easily and pulls loose, it is done. If it is without a bone, you can reach in and try pulling a chunk free, if it comes free, then it is done. If it’s bone in, even in foil, it’ll “wiggle” and feel like it’s about to fall apart.

Should you put rub on pork shoulder overnight?

We usually recommend adding the rub in advance and letting the pork shoulder sit in the fridge for up to 12 hours, or overnight. It saves time and doesn’t do any harm (save for the exception we’ve listed below).

How do you prepare a Boston butt for smoking?

We usually recommend adding the rub in advance and letting the pork shoulder sit in the fridge for up to 12 hours, or overnight. It saves time and doesn’t do any harm (save for the exception we’ve listed below).

Should you marinate Boston butt?

The marinade is just right for injecting into the pork butt before smoking. This guarantees the meat is nice and juicy. The zingy barbecue sauce compliments the pulled pork rather than taking away from the delicious smokey flavor.

How long does it take to smoke a Boston butt at 225?

In your case, smoking a whole six pound Boston butt at 225°F would normally take around one and one-half hours per pound, more or less, to become tender enough to pull or shred (internal temperature of 190+°F), or up to 9 or more hours.

How long smoke 8lb Boston butt?

The typical 8 pound pork shoulder needs to go for about 12 hours. So I am up at 3:30 am and starting my charcoal. I want my smoker/grill to be between 225-250 when I put my meat on. It usually takes me about that long to get the temperature regulated.

How long does it take to cook a 8 pound Boston butt?

Season the pork liberally with salt and pepper and set it fat side up on the rack in the roasting pan. Roast pork butt about 40 minutes per pound, or until the internal temperature reads 180 degrees. Remove it from the oven and let the pork rest in the pan under tented foil for at least an hour.

How long does brisket take to smoke at 225?

How Long to Smoke Brisket at 225 Degrees Fahrenheit. When your smoker is set to 225 degrees, you can expect the brisket to cook at a rate of about 1-1/2 to 2 hours per pound. Therefore, if you buy a whole packer brisket that weighs 12 pounds after trimming, you should plan on an 18-hour cooking session.

Sharing is caring!

Scroll to Top