fbpx

Where to buy precious metal clay?

Sharing is caring!

How much does metal clay cost? Typical costs: A 20 gram package of silver metal clay runs around $25-$40, 50 gram packages are $65-$75. Gold metal clay runs $230-$280 for 5 grams and $350-$400 for 10 grams. A small hand-crafted solid bead would use about two grams of clay, about $2.50-$4 in silver and $70-$115 in gold metal clay.

Is Precious Metal Clay real silver? Precious Metal Clay (PMC) As a solid-phase sintered product of a precious metal powder used to form a precious metal article, the material consists of microscopic particles of pure silver or fine gold and a water-soluble, non-toxic, organic binder that burns off during firing.

Which metal clay is best? Like white copper clay and bronze clay, copper clay provides an economical starting point for learning to work with metal clays. Because of this, copper clay is a great medium for making larger objects (even hollowware on a potter’s wheel), as well as beads and jewelry findings.

Can you get gold metal clay? It gives you a beautiful, soft yellow gold. This soft clay is very easy to use in lump form or can be turned into paste by adding a little water. This gold can be hallmarked as 22 karat gold, once fired it is 91.7% gold and 8.3% silver.

How do you make precious metal clay?

To create a strong metal clay:

  1. Use small metal particles, and a mix of sizes.
  2. Use small binder particles.
  3. Use as little binder and oil as possible, while still keeping the clay workable.
  4. All additives should burn cleanly, and ideally be organic/natural.
  5. The metal clay cannot be contaminated with other metals.

Where to buy precious metal clay? – Related Asked Question

How do you fire precious metal clay?

Light your butane hand torch and set to a blue flame. Hold the torch about 2cm away from your design, moving the flame in a circular motion around the piece. Gradually move the flame closer to the PMC as you make that circular motion. As you heat the PMC you’ll notice that it will start to smoke and then catch fire.

Do I need a kiln for metal clay?

Some base metal clays (depending on their size) and almost all fine silver metal clays can be torch-fired rather than requiring a kiln. An inexpensive, handheld, butane torch can be used as an entry level firing method for small, simple pieces.

READ:   What precious metal is in a computer?

Can you solder metal clay?

Soldering. Precious Metal Clay or Art Clay is metallurgically just like other metals but structurally a little more porous. It can be joined by using the same flux, solder and torches as silver and gold, but because of its porosity, Precious Metal Clay or Art Clay will “soak up” solder.

What is bronze metal clay?

Bronze clay is easily sculpted, molded, textured, carved and formed, and become solid bronze objects when fired in a kiln. Your imagination and just a few simple tools will allow you to create solid bronze jewelry or sculpture.

Is gold clay real gold?

The lump clay is used very much like silver clay and has it’s own unique working properties. The 22K gold paint is a product that is painted onto unfired or finished silver pieces and is fired in a kiln or with a torch.

Gold Clay Products.

Temperature Hold Time
Torch Red Glow 5 min

What types of metal clay are there?

Types of Metal Clay

  • Fine Silver Clay – PMC – Any firing method, 3 clay varieties plus special formulas.
  • Fine Silver Clay – Art Clay – Any firing method, 3 clay varieties plus special formulas.
  • Silver Alloy Clay – PMC PRO – Hard alloy (90% silver). …
  • Gold Clay – Fire as clay or use as an embellishment.

What kind of kiln do you need for metal clay?

Metal Clay Firing Kits

Fine silver clays can be fired with a small butane torch, an enameling kiln, a tabletop jewelry kiln, or a gas burner. Other metal clay types, such as bronze and silver alloy clays, require a carbon firing. Copper clay is the exception. Copper clay can be torch or kiln fired.

Is Silver Clay real silver?

Is it really silver? In short, yes! Silver clay is either 925 Sterling Silver or 999 Fine Silver and can be hallmarked as such.

What is PMC gold?

GOLD-Using PMC Gold

This 22 karat material is an alloy of 91.7% gold and 8.3% silver, refined into microscopic particles that fuse at relatively low temperatures. This unique combination provides rich yellow color and unusual strength. PMC Gold can be used alone, or as a decorative element on silver items.

READ:   Will there be memorial day sales 2020?

When was precious metal clay invented?

PMC or PRECIOUS METAL CLAY was developed in the early 1990s in Japan by metallurgist Masaki Morikawa. The PMC material consists of microscopic particles of pure silver or fine gold powder and a water-soluble, non-toxic, organic binder that burns off during firing.

Can you mix metal clay?

Can I Mix Different Fine Silver Metal Clay Brands In One Piece? Yes, If the firing temperature and shrinkage rates are within a short range you can. To mitigate the distortion of larger shrinkage rates you would mix the clays well before starting, obtaining a shrinkage rate somewhere in between.

Can you do silver clay at home?

Silver clay allows you to make real silver jewellery at home, with a minimal setup of basic tools. You can create a piece from scratch in just a few hours! Visit our ‘Learn More’ page to be directed to helpful, downloadable PDF’s that you can print out and refer back to again and again.

Can you make rings with metal clay?

Remember that precious metal clay is prone to shrinkage during the firing process. And as rings need to be a specific size it’s important to know how much your clay is going to shrink by so that you can initially size up as you’re shaping your ring, ready for firing.

Can I fire metal clay with a torch?

Torch firing is a great, inexpensive, way to fire your metal clay. You can use a small butane gas torch, like a kitchen torch, to fire all the Art Clay Silver clays. The piece you fire shouldn’t be much larger than a £2 coin, and weigh no more than 25 grams.

Can you bake metal clay?

Metal clays (silver, bronze and copper) are fired in a kiln or with a torch. You can create and fire a metal clay piece then add a polymer addition or inclusion and bake in a home or convection oven.

Can you bake metal clay in the oven?

Using a kiln all but guarantees your precious metal clay will come out perfectly, but unless you’re a diehard jewelry maker, it’s unlikely you have one of those lying around. Instead, grab your good ole’ toaster oven and set it to 350 F. Place your final piece on a pan and bake for 20 minutes. That’s it!

READ:   Where to keep precious metals?

Can you use a microwave kiln for metal clay?

Designed for working primarily with small glass objects or precious metal clay, the microwave kiln is also suitable for firing small clay pieces, from beads and pendants to test tiles or small sculptural objects.

Can I use a ceramic kiln for metal clay?

Kiln Shelves: Kiln shelves are offered in a variety of materials, the most common of which are ceramic fiberboard, ceramic board, soldering surface, and firebrick. All can be used with metal clay, but the difference in material dictates their lifespan.

What is base metal clay?

Metal Clay Silver, Bronze and Copper

Silver clay or metal clay is a combination of water, binders, and small particles of either silver, gold or alloys of copper. These clays are molded by hand into a desired shape then heated in a kiln or torch to remove the binder and fuse the metal powder into a solid form.

Do you pickle silver clay?

Pickling fine silver is fine. However, fired metal clay, whilst fine silver in composition, is in reality much more porous. The pickle gets into the microscopic holes, and over time will degrade the metal.

Can you Colour silver clay?

You’ll have the opportunity to use a range of colours on fired metal clay. Enameling needn’t be very difficult and require a kiln. You can add beautiful enamel to your silver metal clay with a simple butane torch. If you already torch fire your metal clay, you’ll find working with colourful enamels very easy.

How do you finish silver clay?

You’ll have the opportunity to use a range of colours on fired metal clay. Enameling needn’t be very difficult and require a kiln. You can add beautiful enamel to your silver metal clay with a simple butane torch. If you already torch fire your metal clay, you’ll find working with colourful enamels very easy.

Sharing is caring!